SKE Crystal 2 in 1 Prefilled Pod

SKE Crystal 2 in 1 Prefilled Pod

The SKE Crystal 2-in-1 is a two pod system, which will be used on a long and diversified basis. It is not a disposable as it takes Crystal 2-in-1 pods that fit into a single rechargeable unit. The system has an 850 mAh battery and has a capacity of about 2,000 puffs per full load of pods which makes the system a high capacity competitor in the SKE range.

Crystal 2 in 1 Pods & Coil Design

The system pods have pre-packed 2 ml cartridges with in-built mesh coils which are reliable, tasty and leak-proof. The SKE 2-in-1 pods have the option of putting two different pods into the device to rotate the flavours or play longer without having to change the device. The design is basic in nature: snap in pods, inhale and change when empty.

SKE Crystal 2-in-1 Compatibility & Usage Notes

The device shell of the SKE Crystal 2-in-1 can be activated by using a draw (there is no fire button) and the pod shells are visible enough to check the state of the liquids. The system has an 850 mAh battery that allows it to be charged in multiple pods before charge is depleted. The advantages of the two-pod format are the waste reduction relative to single-use units and the adoption of the more sustainable consumption model.

SKE Crystal 2-in-1 Pods – TPD Compliance

When the vapour began to be less or the flavour loses its appeal then you can replace the used SKE Crystal 2-in-1 pods (pod modules) but not the core device. Independent replacement pods are also provided to the same battery unit. The system also has TPD compatible versions in regulated markets where every pod is not exceeding a 2 ml capacity limit and is using legal amounts of nicotine salts to be used in the UK/EU.

SKE Crystal Pods Available Flavours

1. Blueberry Raspberry
2. Cherry Ice / Cherries
3. Cola Ice / Cola Lemonade
4. Lemon Lime
5. Strawberry Burst / Strawberries
6. Tropical Mix / Tropical Fruits
7. Watermelon Ice / Watermelon
8. White Peach / Peach

Step By Step Guideline to Use SKE Crystal 2 in 1 Prefilled Pod

Step 1: Take out the two SKE Crystal 2-in-1 pods, out of the package, and remove the safety caps.

Step 2: Pull the pods and insert them into the pod slots provided by the device until they fit in.

Step 3: Select the pod that you desire to be active using the switch, or the mechanism that may be situated on the device (not all devices have a switch).

Step 4: Inhale to vape; the device is draw-activated and requires no button.

Step 5: Once the vapour or flavour starts to wear out, dismount the served pod(s) and replace them with new SKE 2-in-1 pods.